/*=========================================================================
 *
 *  Copyright NumFOCUS
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *         http://www.apache.org/licenses/LICENSE-2.0.txt
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 *=========================================================================*/

#include "itkImageRegistrationMethod.h"
#include "itkAffineTransform.h"
#include "itkMatchCardinalityImageToImageMetric.h"
#include "itkNearestNeighborInterpolateImageFunction.h"
#include "itkAmoebaOptimizer.h"
#include "itkCenteredTransformInitializer.h"


#include "itkImageFileReader.h"
#include "itkImageFileWriter.h"

#include "itkResampleImageFilter.h"
#include "itkCastImageFilter.h"
#include "itkSquaredDifferenceImageFilter.h"
#include "itkFileOutputWindow.h"

//
//  The following piece of code implements an observer
//  that will monitor the evolution of the registration process.
//
#include "itkCommand.h"
class CommandIterationUpdate19 : public itk::Command
{
public:
  using Self = CommandIterationUpdate19;
  using Superclass = itk::Command;
  using Pointer = itk::SmartPointer<Self>;
  itkNewMacro(Self);

protected:
  CommandIterationUpdate19() = default;

public:
  using OptimizerType = itk::AmoebaOptimizer;
  using OptimizerPointer = const OptimizerType *;

  void
  Execute(itk::Object * caller, const itk::EventObject & event) override
  {
    Execute((const itk::Object *)caller, event);
  }

  void
  Execute(const itk::Object * object, const itk::EventObject & event) override
  {
    auto optimizer = static_cast<OptimizerPointer>(object);
    if (optimizer == nullptr)
    {
      return;
    }
    if (!itk::IterationEvent().CheckEvent(&event))
    {
      return;
    }
    std::cout << optimizer->GetCachedValue() << "   ";
    std::cout << optimizer->GetCachedCurrentPosition() << std::endl;
  }
};


int
main(int argc, char * argv[])
{
  if (argc < 3)
  {
    std::cerr << "Missing Parameters " << std::endl;
    std::cerr << "Usage: " << argv[0];
    std::cerr << " fixedImageFile  movingImageFile ";
    std::cerr << " outputImagefile [differenceImage]" << std::endl;
    std::cerr << " [initialTx] [initialTy]" << std::endl;
    return EXIT_FAILURE;
  }

  itk::FileOutputWindow::Pointer fow = itk::FileOutputWindow::New();
  fow->SetInstance(fow);

  // The types of each one of the components in the registration methods
  // should be instantiated. First, we select the image dimension and the type
  // for representing image pixels.
  //
  constexpr unsigned int Dimension = 2;
  using PixelType = float;


  //  The types of the input images are instantiated by the following lines.
  //
  using FixedImageType = itk::Image<PixelType, Dimension>;
  using MovingImageType = itk::Image<PixelType, Dimension>;

  using TransformType = itk::AffineTransform<double, Dimension>;

  using OptimizerType = itk::AmoebaOptimizer;

  using MetricType =
    itk::MatchCardinalityImageToImageMetric<FixedImageType, MovingImageType>;

  //  Finally, the type of the interpolator is declared. The
  //  interpolator will evaluate the moving image at non-grid
  //  positions.
  using InterpolatorType =
    itk::NearestNeighborInterpolateImageFunction<MovingImageType, double>;

  //  The registration method type is instantiated using the types of the
  //  fixed and moving images. This class is responsible for interconnecting
  //  all the components we have described so far.
  using RegistrationType =
    itk::ImageRegistrationMethod<FixedImageType, MovingImageType>;

  //  Each one of the registration components is created using its
  //  \code{New()} method and is assigned to its respective
  //  \doxygen{SmartPointer}.
  //
  MetricType::Pointer       metric = MetricType::New();
  TransformType::Pointer    transform = TransformType::New();
  OptimizerType::Pointer    optimizer = OptimizerType::New();
  InterpolatorType::Pointer interpolator = InterpolatorType::New();
  RegistrationType::Pointer registration = RegistrationType::New();

  metric->MeasureMatchesOff();


  //  Each component is now connected to the instance of the registration
  //  method. \index{itk::RegistrationMethod!SetMetric()}
  //  \index{itk::RegistrationMethod!SetOptimizer()}
  //  \index{itk::RegistrationMethod!SetTransform()}
  //  \index{itk::RegistrationMethod!SetFixedImage()}
  //  \index{itk::RegistrationMethod!SetMovingImage()}
  //  \index{itk::RegistrationMethod!SetInterpolator()}
  //
  registration->SetMetric(metric);
  registration->SetOptimizer(optimizer);
  registration->SetTransform(transform);
  registration->SetInterpolator(interpolator);

  using FixedImageReaderType = itk::ImageFileReader<FixedImageType>;
  using MovingImageReaderType = itk::ImageFileReader<MovingImageType>;

  FixedImageReaderType::Pointer fixedImageReader =
    FixedImageReaderType::New();
  MovingImageReaderType::Pointer movingImageReader =
    MovingImageReaderType::New();

  fixedImageReader->SetFileName(argv[1]);
  movingImageReader->SetFileName(argv[2]);


  //  In this example, the fixed and moving images are read from files. This
  //  requires the \doxygen{ImageRegistrationMethod} to acquire its inputs to
  //  the output of the readers.
  //
  registration->SetFixedImage(fixedImageReader->GetOutput());
  registration->SetMovingImage(movingImageReader->GetOutput());

  //  The registration can be restricted to consider only a particular region
  //  of the fixed image as input to the metric computation. This region is
  //  defined by the \code{SetFixedImageRegion()} method.  You could use this
  //  feature to reduce the computational time of the registration or to avoid
  //  unwanted objects present in the image affecting the registration
  //  outcome. In this example we use the full available content of the image.
  //  This region is identified by the \code{BufferedRegion} of the fixed
  //  image. Note that for this region to be valid the reader must first
  //  invoke its \code{Update()} method.
  //
  //  \index{itk::ImageRegistrationMethod!SetFixedImageRegion()}
  //  \index{itk::Image!GetBufferedRegion()}
  //
  fixedImageReader->Update();
  movingImageReader->Update();

  registration->SetFixedImageRegion(
    fixedImageReader->GetOutput()->GetBufferedRegion());


  //
  // Here we initialize the transform to make sure that the center of
  // rotation is set to the center of mass of the object in the fixed image.
  //
  using TransformInitializerType =
    itk::CenteredTransformInitializer<TransformType,
                                      FixedImageType,
                                      MovingImageType>;

  TransformInitializerType::Pointer initializer =
    TransformInitializerType::New();

  initializer->SetTransform(transform);
  initializer->SetFixedImage(fixedImageReader->GetOutput());
  initializer->SetMovingImage(movingImageReader->GetOutput());

  initializer->MomentsOn();
  initializer->InitializeTransform();


  //  The parameters of the transform are initialized by passing them in an
  //  array. This can be used to setup an initial known correction of the
  //  misalignment. In this particular case, a translation transform is
  //  being used for the registration. The array of parameters for this
  //  transform is simply composed of the rotation matrix and the translation
  //  values along each dimension.
  //
  //  \index{itk::AffineTransform!GetNumberOfParameters()}
  //  \index{itk::RegistrationMethod!SetInitialTransformParameters()}
  //
  using ParametersType = RegistrationType::ParametersType;
  ParametersType initialParameters = transform->GetParameters();

  double tx = 0.0;
  double ty = 0.0;

  if (argc > 6)
  {
    tx = std::stod(argv[5]);
    ty = std::stod(argv[6]);
  }

  initialParameters[4] = tx; // Initial offset in mm along X
  initialParameters[5] = ty; // Initial offset in mm along Y

  registration->SetInitialTransformParameters(initialParameters);

  //  At this point the registration method is ready for execution. The
  //  optimizer is the component that drives the execution of the
  //  registration.  However, the ImageRegistrationMethod class
  //  orchestrates the ensemble to make sure that everything is in place
  //  before control is passed to the optimizer.
  //

  const unsigned int numberOfParameters = transform->GetNumberOfParameters();

  OptimizerType::ParametersType simplexDelta(numberOfParameters);

  // This parameter is tightly coupled to the translationScale below
  constexpr double stepInParametricSpace = 0.01;

  simplexDelta.Fill(stepInParametricSpace);

  optimizer->AutomaticInitialSimplexOff();
  optimizer->SetInitialSimplexDelta(simplexDelta);


  optimizer->SetParametersConvergenceTolerance(1e-4); // about 0.005 degrees
  optimizer->SetFunctionConvergenceTolerance(
    1e-6); // variation in metric value

  optimizer->SetMaximumNumberOfIterations(200);


  // This parameter is tightly coupled to the stepInParametricSpace above.
  double translationScale = 1.0 / 1000.0;

  using OptimizerScalesType = OptimizerType::ScalesType;
  OptimizerScalesType optimizerScales(numberOfParameters);

  optimizerScales[0] = 1.0;
  optimizerScales[1] = 1.0;
  optimizerScales[2] = 1.0;
  optimizerScales[3] = 1.0;
  optimizerScales[4] = translationScale;
  optimizerScales[5] = translationScale;

  optimizer->SetScales(optimizerScales);


  //
  // Create the Command observer and register it with the optimizer.
  //
  CommandIterationUpdate19::Pointer observer =
    CommandIterationUpdate19::New();
  optimizer->AddObserver(itk::IterationEvent(), observer);


  //  The registration process is triggered by an invocation of the
  //  \code{Update()} method. If something goes wrong during the
  //  initialization or execution of the registration an exception will be
  //  thrown. We should therefore place the \code{Update()} method
  //  in a \code{try/catch} block as illustrated in the following lines.
  //
  try
  {
    // print out the initial metric value.  need to initialize the
    // registration method to force all the connections to be established.
    registration->Initialize();
    std::cout << "Initial Metric value  = "
              << metric->GetValue(initialParameters) << std::endl;

    // run the registration
    registration->Update();
    std::cout << "Optimizer stop condition = "
              << registration->GetOptimizer()->GetStopConditionDescription()
              << std::endl;
  }
  catch (const itk::ExceptionObject & err)
  {
    std::cout << "ExceptionObject caught !" << std::endl;
    std::cout << err << std::endl;
    return EXIT_FAILURE;
  }

  // In a real application, you may attempt to recover from the error in the
  // catch block. Here we are simply printing out a message and then
  // terminating the execution of the program.
  //

  //
  //  The result of the registration process is an array of parameters that
  //  defines the spatial transformation in an unique way. This final result
  //  is obtained using the \code{GetLastTransformParameters()} method.
  //
  //  \index{itk::RegistrationMethod!GetLastTransformParameters()}
  //
  ParametersType finalParameters = registration->GetLastTransformParameters();

  //  In the case of the \doxygen{AffineTransform}, there is a straightforward
  //  interpretation of the parameters.  The last two elements of the array
  //  corresponds to a translation along one spatial dimension.
  //
  const double TranslationAlongX = finalParameters[4];
  const double TranslationAlongY = finalParameters[5];

  //  The optimizer can be queried for the actual number of iterations
  //  performed to reach convergence.
  //
  const unsigned int numberOfIterations =
    optimizer->GetOptimizer()->get_num_evaluations();

  //  The value of the image metric corresponding to the last set of
  //  parameters can be obtained with the \code{GetValue()} method of the
  //  optimizer. Since the AmoebaOptimizer does not yet support a call to
  //  GetValue(), we will simply re-evaluate the metric at the final
  //  parameters.
  //
  const double bestValue = metric->GetValue(finalParameters);

  // Print out results
  //
  std::cout << "Result = " << std::endl;
  std::cout << " Translation X = " << TranslationAlongX << std::endl;
  std::cout << " Translation Y = " << TranslationAlongY << std::endl;
  std::cout << " Iterations    = " << numberOfIterations << std::endl;
  std::cout << " Metric value  = " << bestValue << std::endl;

  //  It is common, as the last step of a registration task, to use the
  //  resulting transform to map the moving image into the fixed image space.
  //  This is easily done with the \doxygen{ResampleImageFilter}. Please
  //  refer to Section~\ref{sec:ResampleImageFilter} for details on the use
  //  of this filter.  First, a ResampleImageFilter type is instantiated
  //  using the image types. It is convenient to use the fixed image type as
  //  the output type since it is likely that the transformed moving image
  //  will be compared with the fixed image.
  //
  using ResampleFilterType =
    itk::ResampleImageFilter<MovingImageType, FixedImageType>;

  //  A transform of the same type used in the registration process should be
  //  created and initialized with the parameters resulting from the
  //  registration process.
  //
  //  \index{itk::ImageRegistrationMethod!Resampling image}
  //
  TransformType::Pointer finalTransform = TransformType::New();
  finalTransform->SetParameters(finalParameters);
  finalTransform->SetFixedParameters(transform->GetFixedParameters());

  std::cout << "Final Transform " << std::endl;
  finalTransform->Print(std::cout);

  //  Then a resampling filter is created and the corresponding transform and
  //  moving image connected as inputs.
  //
  ResampleFilterType::Pointer resample = ResampleFilterType::New();
  resample->SetTransform(finalTransform);
  resample->SetInput(movingImageReader->GetOutput());

  //  As described in Section \ref{sec:ResampleImageFilter}, the
  //  ResampleImageFilter requires additional parameters to be
  //  specified, in particular, the spacing, origin and size of the output
  //  image. The default pixel value is also set to the standard label
  //  for "unknown" or background. Finally, we need to set the
  //  interpolator to be the same type of interpolator as the
  //  registration method used (nearest neighbor).
  //
  FixedImageType::Pointer fixedImage = fixedImageReader->GetOutput();
  resample->SetSize(fixedImage->GetLargestPossibleRegion().GetSize());
  resample->SetOutputOrigin(fixedImage->GetOrigin());
  resample->SetOutputSpacing(fixedImage->GetSpacing());
  resample->SetOutputDirection(fixedImage->GetDirection());
  resample->SetDefaultPixelValue(0);
  resample->SetInterpolator(interpolator);

  //  The output of the filter is passed to a writer that will store the
  //  image in a file. An \doxygen{CastImageFilter} is used to convert the
  //  pixel type of the resampled image to the final type used by the
  //  writer. The cast and writer filters are instantiated below.
  //
  using OutputPixelType = unsigned short;
  using OutputImageType = itk::Image<OutputPixelType, Dimension>;
  using CastFilterType =
    itk::CastImageFilter<FixedImageType, OutputImageType>;
  using WriterType = itk::ImageFileWriter<OutputImageType>;

  //  The filters are created by invoking their \code{New()}
  //  method.
  //
  WriterType::Pointer     writer = WriterType::New();
  CastFilterType::Pointer caster = CastFilterType::New();


  writer->SetFileName(argv[3]);


  //  The \code{Update()} method of the writer is invoked in order to trigger
  //  the execution of the pipeline.
  //
  caster->SetInput(resample->GetOutput());
  writer->SetInput(caster->GetOutput());
  writer->Update();


  //
  //  The fixed image and the transformed moving image can easily be compared
  //  using the \code{SquaredDifferenceImageFilter}. This pixel-wise
  //  filter computes the squared value of the difference between homologous
  //  pixels of its input images.
  //
  using DifferenceFilterType =
    itk::SquaredDifferenceImageFilter<FixedImageType,
                                      FixedImageType,
                                      OutputImageType>;

  DifferenceFilterType::Pointer difference = DifferenceFilterType::New();
  difference->SetInput1(fixedImageReader->GetOutput());
  difference->SetInput2(resample->GetOutput());

  //  Its output can be passed to another writer.
  //
  WriterType::Pointer writer2 = WriterType::New();
  writer2->SetInput(difference->GetOutput());

  if (argc > 4)
  {
    writer2->SetFileName(argv[4]);
    writer2->Update();
  }


  return EXIT_SUCCESS;
}