/*!
\if MANPAGES
\page dcmmkdir Create a DICOMDIR file
\else
\page dcmmkdir dcmmkdir: Create a DICOMDIR file
\endif
\section dcmmkdir_synopsis SYNOPSIS
\verbatim
dcmmkdir [options] [dcmfile-in...]
\endverbatim
\section dcmmkdir_description DESCRIPTION
The \b dcmmkdir utility creates a \e DICOMDIR file from the specified
referenced DICOM files according to the DICOM Part 11 Media Storage Application
Profiles.
Currently the following profiles are supported (others might be added later):
\li General Purpose CD-R Interchange (STD-GEN-CD)
\li General Purpose Interchange on DVD-RAM Media (STD-GEN-DVD-RAM)
\li General Purpose DVD Interchange with JPEG (STD-GEN-DVD-JPEG)
\li General Purpose DVD Interchange with JPEG 2000 (STD-GEN-DVD-J2K)
\li General Purpose BD Interchange with JPEG (STD-GEN-BD-JPEG)
\li General Purpose BD Interchange with JPEG 2000 (STD-GEN-BD-J2K)
\li General Purpose BD Interchange with MPEG2 MP\@ML (STD-GEN-BD-MPEG2-MPML)
\li General Purpose BD Interchange with MPEG2 MP\@HL (STD-GEN-BD-MPEG2-MPHL)
\li General Purpose BD Interchange with MPEG-4 AVC/H.264 HiP\@Level4.1
(STD-GEN-BD-MPEG4-HPLV41)
\li General Purpose BD Interchange with MPEG-4 AVC/H.264 BD-Compatible
HiP\@Level4.1 (STD-GEN-BD-MPEG4-HPLV41BD)
\li General Purpose BD Interchange with MPEG-4 AVC/H.264 HiP\@Level4.2 for 2D
video (STD-GEN-BD-MPEG4-HPLV42-2D)
\li General Purpose BD Interchange with MPEG-4 AVC/H.264 HiP\@Level4.2 for 3D
video (STD-GEN-BD-MPEG4-HPLV42-3D)
\li General Purpose BD Interchange with MPEG-4 AVC/H.264 Stereo HiP\@Level4.2
(STD-GEN-BD-MPEG4-SHPLV42)
\li General Purpose USB and Flash Memory Interchange with JPEG
(STD-GEN-USB/MMC/CF/SD-JPEG)
\li General Purpose USB and Flash Memory Interchange with JPEG 2000
(STD-GEN-USB/MMC/CF/SD-J2K)
\li General Purpose MIME Interchange (STD-GEN-MIME)
\li DVD Interchange with MPEG2 MP\@ML (STD-DVD-MPEG2-MPML)
\li Basic Cardiac X-Ray Angiographic Studies on CD-R Media (STD-XABC-CD)
\li 1024 X-Ray Angiographic Studies on CD-R Media (STD-XA1K-CD)
\li 1024 X-Ray Angiographic Studies on DVD Media (STD-XA1K-DVD)
\li Dental Radiograph Interchange (STD-DEN-CD)
\li CT/MR Studies on various Media (STD-CTMR-xxxx)
\li Ultrasound Single Frame for Image Display (STD-US-ID-SF-xxxx)
\li Ultrasound Single Frame with Spatial Calibration (STD-US-SC-SF-xxxx)
\li Ultrasound Single Frame with Combined Calibration (STD-US-CC-SF-xxxx)
\li Ultrasound Single & Multi-Frame for Image Display (STD-US-ID-MF-xxxx)
\li Ultrasound Single & Multi-Frame with Spatial Calibration
(STD-US-SC-MF-xxxx)
\li Ultrasound Single & Multi-Frame with Combined Calibration
(STD-US-CC-MF-xxxx)
\li 12-lead ECG Interchange on Diskette (STD-WVFM-ECG-FD)
\li Hemodynamic Waveform Interchange on Diskette (STD-WVFM-HD-FD)
This tool extends \b dcmgpdir which can only create General Purpose \e DICOMDIR
files. The default behavior of \b dcmmkdir (with \e --general-purpose) is
equivalent to that of \b dcmgpdir.
\section dcmmkdir_parameters PARAMETERS
\verbatim
dcmfile-in referenced DICOM file (or directory to be scanned)
\endverbatim
\section dcmmkdir_options OPTIONS
\subsection dcmmkdir_general_options general options
\verbatim
-h --help
print this help text and exit
--version
print version information and exit
--arguments
print expanded command line arguments
-q --quiet
quiet mode, print no warnings and errors
-v --verbose
verbose mode, print processing details
-d --debug
debug mode, print debug information
-ll --log-level [l]evel: string constant
(fatal, error, warn, info, debug, trace)
use level l for the logger
-lc --log-config [f]ilename: string
use config file f for the logger
\endverbatim
\subsection dcmmkdir_input_options input options
\verbatim
DICOMDIR identifiers:
+F --fileset-id [i]d: string
use specific file-set ID
(default: DCMTK_MEDIA_DEMO, "" for none)
+R --descriptor [f]ilename: string
add a file-set descriptor file ID
(e.g. README, default: no descriptor)
+C --char-set [c]harset: string
add a specific character set for descriptor
(default: "ISO_IR 100" if descriptor present)
reading:
+id --input-directory [d]irectory: string
read referenced DICOM files from directory d
(default for --recurse: current directory)
-m --keep-filenames
expect filenames to be in DICOM format (default)
+m --map-filenames
map to DICOM filenames (lowercase->uppercase,
and remove trailing period)
-r --no-recurse
do not recurse within directories (default)
+r --recurse
recurse within filesystem directories
+p --pattern [p]attern: string (only with --recurse)
pattern for filename matching (wildcards)
# possibly not available on all systems
\endverbatim
\subsection dcmmkdir_processing_options processing options
\verbatim
consistency check:
-W --no-consistency-check
do not check files for consistency
+W --warn-inconsist-files
warn about inconsistent files (default)
-a --abort-inconsist-file
abort on first inconsistent file
type 1 attributes:
-I --strict
exit with error if DICOMDIR type 1 attributes
are missing in DICOM file (default)
+I --invent
invent DICOMDIR type 1 attributes if missing in DICOM file
+Ipi --invent-patient-id
invent new PatientID in case of inconsistent
PatientName attributes
other checks:
+Nrs --allow-retired-sop
allow retired SOP classes defined in previous editions
of the DICOM standard
-Nxc --no-xfer-check
do not reject images with non-standard transfer syntax
(just warn)
-Nec --no-encoding-check
do not reject images with non-standard pixel encoding
(just warn)
-Nrc --no-resolution-check
do not reject images with non-standard spatial resolution
(just warn)
icon images:
+X --add-icon-image
add monochrome icon image on IMAGE level
(default for cardiac profiles)
-Xs --icon-image-size [s]ize: integer (1..128)
width and height of the icon image (in pixel)
(fixed: 128 for XA, 64 for CT/MR profile)
-Xi --icon-file-prefix [p]refix: string
use PGM image 'prefix'+'dcmfile-in' as icon
(default: create icon from DICOM image)
-Xd --default-icon [f]ilename: string
use specified PGM image if icon cannot be
created automatically (default: black image)
\endverbatim
\subsection dcmmkdir_output_options output options
\verbatim
DICOMDIR file:
+D --output-file [f]ilename: string
generate specific DICOMDIR file
(default: DICOMDIR in current directory)
profiles:
-Pgp --general-purpose
General Purpose Interchange on CD-R or DVD-RAM Media
(STD-GEN-CD/DVD-RAM, default)
-Pdv --general-dvd-jpeg
General Purpose DVD Interchange with JPEG
(STD-GEN-DVD-JPEG)
-Pd2 --general-dvd-j2k
General Purpose DVD Interchange with JPEG 2000
(STD-GEN-DVD-J2K)
-Pbd --general-bd-jpeg
General Purpose BD Interchange with JPEG
(STD-GEN-BD-JPEG)
-Pb2 --general-bd-j2k
General Purpose BD Interchange with JPEG 2000
(STD-GEN-BD-J2K)
-Pbm --general-bd-mpeg2-mpml
General Purpose BD Interchange with MPEG2 MP@ML
(STD-GEN-BD-MPEG2-MPML)
-Pbh --general-bd-mpeg2-mphl
General Purpose BD Interchange with MPEG2 MP@HL
(STD-GEN-BD-MPEG2-MPHL)
-Pba --general-bd-mpeg4-hp
General Purpose BD Interchange with MPEG-4 AVC/H.264
HiP@Level4.1 (STD-GEN-BD-MPEG4-HPLV41)
-Pbb --general-bd-mpeg4-hpbd
General Purpose BD Interchange with MPEG-4 AVC/H.264
BD-Compatible HiP@Level4.1 (STD-GEN-BD-MPEG4-HPLV41BD)
--general-bd-mpeg4-hp2d
General Purpose BD Interchange with MPEG-4 AVC/H.264
HiP@Level4.2 for 2D video (STD-GEN-BD-MPEG4-HPLV42-2D)
--general-bd-mpeg4-hp3d
General Purpose BD Interchange with MPEG-4 AVC/H.264
HiP@Level4.2 for 3D video (STD-GEN-BD-MPEG4-HPLV42-3D)
--general-bd-mpeg4-hpst
General Purpose BD Interchange with MPEG-4 AVC/H.264
Stereo HiP@Level4.2 (STD-GEN-BD-MPEG4-SHPLV42)
-Pfl --usb-and-flash-jpeg
General Purpose USB/Flash Memory Interchange with JPEG
(STD-GEN-USB/MMC/CF/SD-JPEG)
-Pf2 --usb-and-flash-j2k
General Purpose USB/Flash Memory Interchange with JPEG 2000
(STD-GEN-USB/MMC/CF/SD-J2K)
-Pmi --general-mime
General Purpose MIME Interchange (STD-GEN-MIME)
-Pmp --mpeg2-mpml-dvd
DVD Interchange with MPEG2 Main Profile @ Main Level
(STD-DVD-MPEG2-MPML)
-Pbc --basic-cardiac
Basic Cardiac X-Ray Angiographic Studies on CD-R Media
(STD-XABC-CD)
-Pxa --xray-angiographic
1024 X-Ray Angiographic Studies on CD-R Media
(STD-XA1K-CD)
-Pxd --xray-angiographic-dvd
1024 X-Ray Angiographic Studies on DVD Media
(STD-XA1K-DVD)
-Pde --dental-radiograph
Dental Radiograph Interchange (STD-DEN-CD)
-Pcm --ct-and-mr
CT/MR Studies (STD-CTMR-xxxx)
-Pus --ultrasound-id-sf
Ultrasound Single Frame for Image Display
(STD-US-ID-SF-xxxx)
--ultrasound-sc-sf
Ultrasound Single Frame with Spatial Calibration
(STD-US-SC-SF-xxxx)
--ultrasound-cc-sf
Ultrasound Single Frame with Combined Calibration
(STD-US-CC-SF-xxxx)
-Pum --ultrasound-id-mf
Ultrasound Single & Multi-Frame for Image Display
(STD-US-ID-MF-xxxx)
--ultrasound-sc-mf
Ultrasound Single & Multi-Frame with Spatial Calibration
(STD-UD-SC-MF-xxxx)
--ultrasound-cc-mf
Ultrasound Single & Multi-Frame with Combined Calibration
(STD-UD-CC-MF-xxxx)
-Pec --12-lead-ecg
12-lead ECG Interchange on Diskette
(STD-WVFM-ECG-FD)
-Phd --hemodynamic-waveform
Hemodynamic Waveform Interchange on Diskette
(STD-WVFM-HD-FD)
writing:
-A --replace
replace existing DICOMDIR (default)
+A --append
append to existing DICOMDIR
+U --update
update existing DICOMDIR
-w --discard
do not write out DICOMDIR
backup:
--create-backup
create a backup of existing DICOMDIR (default)
-nb --no-backup
do not create a backup of existing DICOMDIR
post-1993 value representations:
+u --enable-new-vr
enable support for new VRs (UN/UT) (default)
-u --disable-new-vr
disable support for new VRs, convert to OB
group length encoding:
-g --group-length-remove
write without group length elements (default)
+g --group-length-create
write with group length elements
length encoding in sequences and items:
+e --length-explicit
write with explicit lengths (default)
-e --length-undefined
write with undefined lengths
\endverbatim
\section dcmmkdir_notes NOTES
All files specified on the command line (or discovered by recursively examining
the contents of directories with the \e +r option) are first evaluated for
their compatibility with the specified Media Storage Application Profile (Part
11). Only appropriate files encoded using one of the allowed Transfer Syntaxes
will be accepted. Files having invalid filenames will be rejected (the rules
can be relaxed via the \e +m option). Files missing required attributes will
be rejected (the \e +I option can relax this behavior).
A \e DICOMDIR file will only be constructed if all files have passed initial
tests.
The \b dcmmkdir utility also allows one to append new entries to and to update
existing entries in a \e DICOMDIR file. Using option \e +A new entries are
only appended to the DICOMDIR, i.e. existing records like the ones for PATIENT
information are not updated. Using option \e +U also existing records are
updated according to the information found in the referenced DICOM files.
Please note that this update process might be slower than just appending new
entries. However, it makes sure that additional information that is required
for the selected application profile is also added to existing records.
The support for icon images is currently restricted to monochrome images.
This might change in the future. Till then, color images are automatically
converted to grayscale mode. The icon size is 128*128 pixels for the cardiac
profiles (as required by the DICOM standard) and 64*64 for all others.
\subsection dcmmkdir_scanning_directories Scanning Directories
Adding files from directories is possible by using option \e --recurse. If no
further command line parameters are given, the directory specified by option
\e --input-directory (default: current directory) is scanned for files. If
parameters are given, they can either specify a file or directory name; the
input directory is always prepended. If the files in the provided directories
should be selected according to a specific name pattern (e.g. using wildcard
matching), option \e --pattern has to be used. Please note that this file
pattern only applies to the files within the scanned directories, and, if any
other patterns are specified on the command line outside the
\e --input-directory option (e.g. in order to select further files), these do
not apply to the specified directories.
\section dcmmkdir_logging LOGGING
The level of logging output of the various command line tools and underlying
libraries can be specified by the user. By default, only errors and warnings
are written to the standard error stream. Using option \e --verbose also
informational messages like processing details are reported. Option
\e --debug can be used to get more details on the internal activity, e.g. for
debugging purposes. Other logging levels can be selected using option
\e --log-level. In \e --quiet mode only fatal errors are reported. In such
very severe error events, the application will usually terminate. For more
details on the different logging levels, see documentation of module "oflog".
In case the logging output should be written to file (optionally with logfile
rotation), to syslog (Unix) or the event log (Windows) option \e --log-config
can be used. This configuration file also allows for directing only certain
messages to a particular output stream and for filtering certain messages
based on the module or application where they are generated. An example
configuration file is provided in \/logger.cfg.
\section dcmmkdir_command_line COMMAND LINE
All command line tools use the following notation for parameters: square
brackets enclose optional values (0-1), three trailing dots indicate that
multiple values are allowed (1-n), a combination of both means 0 to n values.
Command line options are distinguished from parameters by a leading '+' or '-'
sign, respectively. Usually, order and position of command line options are
arbitrary (i.e. they can appear anywhere). However, if options are mutually
exclusive the rightmost appearance is used. This behavior conforms to the
standard evaluation rules of common Unix shells.
In addition, one or more command files can be specified using an '@' sign as a
prefix to the filename (e.g. \@command.txt). Such a command argument
is replaced by the content of the corresponding text file (multiple
whitespaces are treated as a single separator unless they appear between two
quotation marks) prior to any further evaluation. Please note that a command
file cannot contain another command file. This simple but effective approach
allows one to summarize common combinations of options/parameters and avoids
longish and confusing command lines (an example is provided in file
\/dumppat.txt).
\section dcmmkdir_environment ENVIRONMENT
The \b dcmmkdir utility will attempt to load DICOM data dictionaries specified
in the \e DCMDICTPATH environment variable. By default, i.e. if the
\e DCMDICTPATH environment variable is not set, the file
\/dicom.dic will be loaded unless the dictionary is built
into the application (default for Windows).
The default behavior should be preferred and the \e DCMDICTPATH environment
variable only used when alternative data dictionaries are required. The
\e DCMDICTPATH environment variable has the same format as the Unix shell
\e PATH variable in that a colon (":") separates entries. On Windows systems,
a semicolon (";") is used as a separator. The data dictionary code will
attempt to load each file specified in the \e DCMDICTPATH environment variable.
It is an error if no data dictionary can be loaded.
\section dcmmkdir_see_also SEE ALSO
dcmgpdir(1)
\section dcmmkdir_copyright COPYRIGHT
Copyright (C) 2001-2022 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.
*/