Console Output

Started by upstream project "Test pending pull request and branch Pipeline/PR-5146" build number 1
originally caused by:
 Pull request #5146 opened
Obtained Jenkinsfile from git https://github.com/tesonep/pharo-benchmarks.git
Running in Durability level: MAX_SURVIVABILITY
[Pipeline] properties
[Pipeline] stage
[Pipeline] { (starting)
[Pipeline] node
Running on pharo-ci-jenkins2-bootstrap-unix-2 in /builds/workspace/pharo-benchmarks
[Pipeline] {
[Pipeline] githubNotify
[Pipeline] }
[Pipeline] // node
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (unix32)
[Pipeline] node
Still waiting to schedule task
Waiting for next available executor on unix
Running on pharo-ci-jenkins2-bootstrap-unix in /builds/workspace/pharo-benchmarks
[Pipeline] {
[Pipeline] cleanWs
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Deferred wipeout is used...
[WS-CLEANUP] done
[Pipeline] timeout
Timeout set to expire in 1 hr 0 min
[Pipeline] {
[Pipeline] step
Copied 1 artifact from "Test pending pull request and branch Pipeline » PR-5146" build number 1
[Pipeline] copyArtifacts
Copied 1 artifact from "pharo-benchmarks" build number 999
[Pipeline] sh
+ bash
+ wget -O - get.pharo.org/32/vm80
--2019-11-15 16:14:53--  http://get.pharo.org/32/vm80
Resolving get.pharo.org (get.pharo.org)... 164.132.235.17, 2001:41d0:301::23
Connecting to get.pharo.org (get.pharo.org)|164.132.235.17|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5306 (5.2K) [application/octet-stream]
Saving to: ‘STDOUT’

     0K .....                                                 100%  676M=0s

2019-11-15 16:14:53 (676 MB/s) - written to stdout [5306/5306]

Downloading the latest pharoVM:
	http://files.pharo.org/get-files/80/pharo-linux-stable.zip
pharo-vm/pharo
Creating starter scripts pharo and pharo-ui
[Pipeline] sh
+ unzip Pharo7.0-PR-32bit-19be85d.zip
Archive:  Pharo7.0-PR-32bit-19be85d.zip
  inflating: Pharo7.0-PR-32bit-19be85d.changes  
  inflating: Pharo7.0-PR-32bit-19be85d.image  
  inflating: Pharo7.0-32bit-19be85d.sources  
 extracting: pharo.version           
[Pipeline] sh
+ ./pharo Pharo7.0-PR-32bit-19be85d.image eval --save Metacello new baseline: 'Benchmarks'; repository:'github://tesonep/pharo-benchmarks/src'; load
pthread_setschedparam failed: Operation not permitted
This VM uses a separate heartbeat thread to update its internal clock
and handle events.  For best operation, this thread should run at a
higher priority, however the VM was unable to change the priority.  The
effect is that heavily loaded systems may experience some latency
issues.  If this occurs, please create the appropriate configuration
file in /etc/security/limits.d/ as shown below:

cat <<END | sudo tee /etc/security/limits.d/pharo.conf
*      hard    rtprio  2
*      soft    rtprio  2
END

and report to the pharo mailing list whether this improves behaviour.

You will need to log out and log back in for the limits to take effect.
For more information please see
https://github.com/OpenSmalltalk/opensmalltalk-vm/releases/tag/r3732#linux

I got an error while cloning: There was an authentication error while trying to execute the operation: . 
This happens usually because you didn't provide a valid set of credentials. 
You may fix this problem in different ways: 

1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa in your command line.
2. adding your keys in settings (open settings browser search for "Use custom SSH keys" and
add your public and private keys).
3. using HTTPS instead SSH (Just use an url in the form HTTPS://etc.git). I will try to clone the HTTPS variant.
Fetched -> BaselineOfBenchmarks-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
Loading baseline of BaselineOfBenchmarks...
I got an error while cloning: There was an authentication error while trying to execute the operation: . 
This happens usually because you didn't provide a valid set of credentials. 
You may fix this problem in different ways: 

1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa in your command line.
2. adding your keys in settings (open settings browser search for "Use custom SSH keys" and
add your public and private keys).
3. using HTTPS instead SSH (Just use an url in the form HTTPS://etc.git). I will try to clone the HTTPS variant.
Fetched -> BaselineOfNeoCSV-CompatibleUserName.1567799239 --- https://github.com/svenvc/NeoCSV.git[master] --- https://github.com/svenvc/NeoCSV.git[master]
I got an error while cloning: There was an authentication error while trying to execute the operation: . 
This happens usually because you didn't provide a valid set of credentials. 
You may fix this problem in different ways: 

1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa in your command line.
2. adding your keys in settings (open settings browser search for "Use custom SSH keys" and
add your public and private keys).
3. using HTTPS instead SSH (Just use an url in the form HTTPS://etc.git). I will try to clone the HTTPS variant.
Fetched -> BaselineOfGithubAPI-CompatibleUserName.1555074969 --- https://github.com/guillep/github-api.git[master] --- https://github.com/guillep/github-api.git[master]
Fetched -> ConfigurationOfSMark-MaxLeske.8 --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/ --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/
Project: SMark 1.0.2
Fetched -> Scripting-MaxLeske.24 --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/ --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/
Fetched -> SMark-MartinDias.52 --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/ --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/
Project: NeoCSV baseline
Fetched -> Neo-CSV-Core-CompatibleUserName.1567799239 --- https://github.com/svenvc/NeoCSV.git[master] --- https://github.com/svenvc/NeoCSV.git[master]
Fetched -> Neo-CSV-Tests-CompatibleUserName.1567799239 --- https://github.com/svenvc/NeoCSV.git[master] --- https://github.com/svenvc/NeoCSV.git[master]
Project: GithubAPI baseline
Fetched -> ConfigurationOfZTimestamp-SvenVanCaekenberghe.28 --- http://mc.stfx.eu/Neo --- http://mc.stfx.eu/Neo
Project: ZTimestamp 20
Fetched -> ZTimestamp-SvenVanCaekenberghe.57 --- http://mc.stfx.eu/Neo --- http://mc.stfx.eu/Neo
Fetched -> GithubAPI-CompatibleUserName.1555074969 --- https://github.com/guillep/github-api.git[master] --- https://github.com/guillep/github-api.git[master]
Fetched -> Benchmarks-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
Fetched -> Benchmarks-Utils-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
Fetched -> Benchmarks-Utils-Github-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
...finished baselinea MetacelloScriptApiExecutor
[Pipeline] sh
+ ./pharo Pharo7.0-PR-32bit-19be85d.image benchmark Benchmarks --full-json=unix32.json --ston=unix32.ston --iterations=10 --previousRun=baseline-unix32.ston
pthread_setschedparam failed: Operation not permitted
This VM uses a separate heartbeat thread to update its internal clock
and handle events.  For best operation, this thread should run at a
higher priority, however the VM was unable to change the priority.  The
effect is that heavily loaded systems may experience some latency
issues.  If this occurs, please create the appropriate configuration
file in /etc/security/limits.d/ as shown below:

cat <<END | sudo tee /etc/security/limits.d/pharo.conf
*      hard    rtprio  2
*      soft    rtprio  2
END

and report to the pharo mailing list whether this improves behaviour.

You will need to log out and log back in for the limits to take effect.
For more information please see
https://github.com/OpenSmalltalk/opensmalltalk-vm/releases/tag/r3732#linux
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] archiveArtifacts
Archiving artifacts
[Pipeline] stash
Stashed 1 file(s)
[Pipeline] }
[Pipeline] // timeout
[Pipeline] }
[Pipeline] // node
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (unix64)
[Pipeline] node
Running on pharo-ci-jenkins2-bootstrap-unix in /builds/workspace/pharo-benchmarks
[Pipeline] {
[Pipeline] cleanWs
[WS-CLEANUP] Deleting project workspace...
[WS-CLEANUP] Deferred wipeout is used...
[WS-CLEANUP] done
[Pipeline] timeout
Timeout set to expire in 1 hr 0 min
[Pipeline] {
[Pipeline] step
Copied 1 artifact from "Test pending pull request and branch Pipeline » PR-5146" build number 1
[Pipeline] copyArtifacts
Copied 1 artifact from "pharo-benchmarks" build number 999
[Pipeline] sh
+ bash
+ wget -O - get.pharo.org/64/vm80
--2019-11-15 16:22:09--  http://get.pharo.org/64/vm80
Resolving get.pharo.org (get.pharo.org)... 164.132.235.17, 2001:41d0:301::23
Connecting to get.pharo.org (get.pharo.org)|164.132.235.17|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5320 (5.2K) [application/octet-stream]
Saving to: ‘STDOUT’

     0K .....                                                 100%  699M=0s

2019-11-15 16:22:09 (699 MB/s) - written to stdout [5320/5320]

Downloading the latest pharoVM:
	http://files.pharo.org/get-files/80/pharo64-linux-stable.zip
pharo-vm/pharo
Creating starter scripts pharo and pharo-ui
[Pipeline] sh
+ unzip Pharo7.0-PR-64bit-19be85d.zip
Archive:  Pharo7.0-PR-64bit-19be85d.zip
  inflating: Pharo7.0-PR-64bit-19be85d.changes  
  inflating: Pharo7.0-PR-64bit-19be85d.image  
  inflating: Pharo7.0-32bit-19be85d.sources  
 extracting: pharo.version           
[Pipeline] sh
+ ./pharo Pharo7.0-PR-64bit-19be85d.image eval --save Metacello new baseline: 'Benchmarks'; repository:'github://tesonep/pharo-benchmarks/src'; load
pthread_setschedparam failed: Operation not permitted
This VM uses a separate heartbeat thread to update its internal clock
and handle events.  For best operation, this thread should run at a
higher priority, however the VM was unable to change the priority.  The
effect is that heavily loaded systems may experience some latency
issues.  If this occurs, please create the appropriate configuration
file in /etc/security/limits.d/ as shown below:

cat <<END | sudo tee /etc/security/limits.d/pharo.conf
*      hard    rtprio  2
*      soft    rtprio  2
END

and report to the pharo mailing list whether this improves behaviour.

You will need to log out and log back in for the limits to take effect.
For more information please see
https://github.com/OpenSmalltalk/opensmalltalk-vm/releases/tag/r3732#linux

I got an error while cloning: There was an authentication error while trying to execute the operation: . 
This happens usually because you didn't provide a valid set of credentials. 
You may fix this problem in different ways: 

1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa in your command line.
2. adding your keys in settings (open settings browser search for "Use custom SSH keys" and
add your public and private keys).
3. using HTTPS instead SSH (Just use an url in the form HTTPS://etc.git). I will try to clone the HTTPS variant.
Fetched -> BaselineOfBenchmarks-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
Loading baseline of BaselineOfBenchmarks...
I got an error while cloning: There was an authentication error while trying to execute the operation: . 
This happens usually because you didn't provide a valid set of credentials. 
You may fix this problem in different ways: 

1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa in your command line.
2. adding your keys in settings (open settings browser search for "Use custom SSH keys" and
add your public and private keys).
3. using HTTPS instead SSH (Just use an url in the form HTTPS://etc.git). I will try to clone the HTTPS variant.
Fetched -> BaselineOfNeoCSV-CompatibleUserName.1567799239 --- https://github.com/svenvc/NeoCSV.git[master] --- https://github.com/svenvc/NeoCSV.git[master]
I got an error while cloning: There was an authentication error while trying to execute the operation: . 
This happens usually because you didn't provide a valid set of credentials. 
You may fix this problem in different ways: 

1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa in your command line.
2. adding your keys in settings (open settings browser search for "Use custom SSH keys" and
add your public and private keys).
3. using HTTPS instead SSH (Just use an url in the form HTTPS://etc.git). I will try to clone the HTTPS variant.
Fetched -> BaselineOfGithubAPI-CompatibleUserName.1555074969 --- https://github.com/guillep/github-api.git[master] --- https://github.com/guillep/github-api.git[master]
Fetched -> ConfigurationOfSMark-MaxLeske.8 --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/ --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/
Project: SMark 1.0.2
Fetched -> Scripting-MaxLeske.24 --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/ --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/
Fetched -> SMark-MartinDias.52 --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/ --- http://smalltalkhub.com/mc/StefanMarr/SMark/main/
Project: NeoCSV baseline
Fetched -> Neo-CSV-Core-CompatibleUserName.1567799239 --- https://github.com/svenvc/NeoCSV.git[master] --- https://github.com/svenvc/NeoCSV.git[master]
Fetched -> Neo-CSV-Tests-CompatibleUserName.1567799239 --- https://github.com/svenvc/NeoCSV.git[master] --- https://github.com/svenvc/NeoCSV.git[master]
Project: GithubAPI baseline
Fetched -> ConfigurationOfZTimestamp-SvenVanCaekenberghe.28 --- http://mc.stfx.eu/Neo --- http://mc.stfx.eu/Neo
Project: ZTimestamp 20
Fetched -> ZTimestamp-SvenVanCaekenberghe.57 --- http://mc.stfx.eu/Neo --- http://mc.stfx.eu/Neo
Fetched -> GithubAPI-CompatibleUserName.1555074969 --- https://github.com/guillep/github-api.git[master] --- https://github.com/guillep/github-api.git[master]
Fetched -> Benchmarks-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
Fetched -> Benchmarks-Utils-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
Fetched -> Benchmarks-Utils-Github-CompatibleUserName.1567367546 --- https://github.com/tesonep/pharo-benchmarks.git[master] --- https://github.com/tesonep/pharo-benchmarks.git[master]
...finished baselinea MetacelloScriptApiExecutor
[Pipeline] sh
+ ./pharo Pharo7.0-PR-64bit-19be85d.image benchmark Benchmarks --full-json=unix64.json --ston=unix64.ston --iterations=10 --previousRun=baseline-unix64.ston
pthread_setschedparam failed: Operation not permitted
This VM uses a separate heartbeat thread to update its internal clock
and handle events.  For best operation, this thread should run at a
higher priority, however the VM was unable to change the priority.  The
effect is that heavily loaded systems may experience some latency
issues.  If this occurs, please create the appropriate configuration
file in /etc/security/limits.d/ as shown below:

cat <<END | sudo tee /etc/security/limits.d/pharo.conf
*      hard    rtprio  2
*      soft    rtprio  2
END

and report to the pharo mailing list whether this improves behaviour.

You will need to log out and log back in for the limits to take effect.
For more information please see
https://github.com/OpenSmalltalk/opensmalltalk-vm/releases/tag/r3732#linux
sh: 1: Cannot fork
./pharo: line 11: 18133 Killed                  "$DIR"/"pharo-vm/pharo" --nodisplay "$@"
[Pipeline] }
[Pipeline] // timeout
[Pipeline] }
[Pipeline] // node
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (notification)
[Pipeline] node
Running on pharo-ci-jenkins2-bootstrap-unix in /builds/workspace/pharo-benchmarks
[Pipeline] {
[Pipeline] githubNotify
[Pipeline] }
[Pipeline] // node
[Pipeline] }
[Pipeline] // stage
[Pipeline] End of Pipeline
ERROR: script returned exit code 137
Finished: FAILURE